Craftsman 315.220381 - Manual (Page 17)

Control Cut
Speed Adjustment
+
A WARNING
ADVERTENCIA
For your lafety, read ownen maoual before opetaUng
taw.
Wear safety gaggles.
Do not perform fneband cols.
• flelarn carriage to full rear position alter each cross cut.
See insiructlons on how to reduce the risk of ktcItbaiA.
When ripping, use pushstick «then blade is set Z Indies or mote from
fenca.
When ripping, use pushblock and auxiliary fence when hlade it tel between
1/Z and 2 iiKhet from fence. Do not make rip cuts nairower than 1/2 inch.
• Keep hands out of path of blade.
Do not reach aroond taw blade.
Itim power
on and wait for blade to stop before moving workpiece or
changing settings.
Unplug saw before changing the blade or servicing.
Para su segurldad, lea y entienda el manual del prcpietarlo antes deopararia sierra
A WARNING
ADVERTENCIA
• Read and understand owners manual
before operating saw.
• For your safety, do not use
accessories without proper guarding.
• Provide proper workpiece support
• Position cutting tool behind the
fence.
• With power off and switch key
removed, turn cutting tool by hand to
make sure it does not strike guard,
fence or any other saw parts.
• Para su seguridad, lea y entienda el
manual del propietario antes de
operar la sierra.
LOCKED
V
i
UNLOCKED
■ PIVOT 1b
17
Fig. 8B
CRHFTSMRir RADIAL SAW 315.220381