Storage – Craftsman 358.799343 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

STORAGE

MM

WARNING:

Perform the follow­

ing steps after each use:
• Stop unit and disconnect from the

power source.

• Store the unit in a stable location.

• Store unit with all guards in place.

Position unit so that any sharp object

cannot accidentally cause injury.

• Store unit well out of the reach of chil­

dren.

Prepare unit for storage at the end of

the season or if it will not be used for

30 days or more.

BLOWER STORAGE

• Disconnect from the power source.
• Clean the entire unit.
• Inspect the blower and all tubes.
• Clean air vents and air inlet of debris.
• Store your unit and extension cord in a

well ventilated area and covered, if

possible, to prevent dust and dirt accu­
mulation. Do not cover with plastic.
Plastic cannot breathe and may cause

condensation and eventual rust or cor­

rosion.

• Check entire unit for loose screws. Re­

place any damaged, worn, or broken
parts.

TROUBLESHOOTING TABLE

A

WARNING:

Always stop unit and disconnect from the power source before

performing all of the recommended remedies below except remedies that re­
quire the unit to be operating.

SYMPTOM

CAUSE

REMEDY

Unit fails to

operate.

1. Switch in the OFF position.

2. Extension cord disconnected.
3. Circuit breaker tripped, or

fuse blown.

4. Mechanioat failure.

1. Move switch to the ON position.

2. Reconnect extension cord.
3. Reset circuit breaker or

fuse.

4. Contact Sears Service (see back

cover).

Unit

vibrates

abnormally.

1. Mechanical failure.

1. Contact Sears Service (see back

cover).

impeiier will
not turn

freely.

1. Debris in air intake area.

2. Mechanical failure.

1. Clean unit. Remove any debris.

2. Contact Sears Service (see back

cover).

Advertising