Craftsman 917.37742 - Manual (Page 4)

These accessories were availabie when this lawn mower was produced. They are also
available at most Sears retail outlets and service centers. Most Sears stores can also order
repair parts for you, when you provide the model number of your lawn mower. Some of
these accessories may not apply to your lawn mower.
LAWN MOWER PERFORMANCE__________________________________
CUPPING DEFLECTOR
FOR REAR DISCHARGE LAWN MOWERS MULCHER KrrS STABILIZER
GRASS CATCHERS
FOR
REAR DISCHARGE
LAWN MOWERS
GRASS CATCHERS
FOR
SIDE DISCHARGE
LAWN MOWERS
GAS CANS
LAWN MOWER MAINTENANCE
AIR FILTERS
ppi jc!
BLADES BLADE ADAPTERS WHEELS ENGINE OIL
MPORTANT: This cutting machine is
capable of amputating hands and feet and
throwing objects. Failure to observe the
following safety instructions could result in
serious injury or death.
Safety standards require operator pres­
ence controls to minimize the risk of injury.
Your unit is equipped with such controis.
Do not attempt to defeat the function of
the operator presence controls under any
circumstances.
Read these instructions and this manual in
its entirety before you attempt to assemble
or operate your new lawn mower. Your
new lawn mower has been assembled at
the factory with the exception of those
parts left unassembled for shipping purpos­
es. All parts such as nuts, washers, bolts,
etc., necessary to complete the assembly
have been placed in the parts bag. To
ensure safe and proper operation of your
lawn mower, all parts and hardware you
assemble must be tightened securely. Use
the correct tools as necessary to ensure
proper tightness.
TO REMOVE LAWN MOWER FROM
CARTON
® Remove loose parts included with
mower.
o Cut down two end corners of carton
and lay end panel down flat,
® Remove all packing materials except
padding between upper and lower han­
dle and padding holding operator pres­
ence control bar to upper handle.
® Roll lawn mower out of carton and
check carton thoroughly for additional
loose parts.
HOW TO SET UP YOUR LAWN