Troubleshcx)ting chart – Craftsman 917.270822 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TROUBLESHCX)TING CHART
PROBLEM
CAUSE
CORRECTION
Loss of drive
• Freewheel control In "disen
gaged” position.
• Motion drive belt worn, dam
aged or broken.
• Air treipped in transmission
during shipment
or servicing.
• Place freewheel control in “en
gaged" position.
• Replace motion drive belt.
• Purge transmission.
Engine “backfires"
when turning engine
• Engine throttle control not set
at “SLOW” position for 30 sec
onds before stopping engine.
• Move throttle control to “SLOW’
position and allow to idle for 30
seconds before stopping engine.
30
Advertising