Bag of parts, Tools required for assembly, Contents of hardware pack – Craftsman 917.292390 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BAG OF PARTS
Your new tiller has been assembled at the
factory with exception of those parts left
unassembled for shipping purposes. To
ensure safe and proper operation of your
tilire all parts and hardware you assemble
must be tightened securely. Use the correct
tools as necessary to insure proper tight-
nOSSk
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes are listed.
(1) Utility knife
(1) Pair of pliers
(2) 1/2" wrenches
OPERATOR’S POSITION
When right or left hand is mentioned in
this manual, it means when you are in
the operating position (standing behind
tiller handles).
Front
CONTENTS OF HARDWARE PACK
(1) Manual
7^
(1) Plastic
Cable Clip
(2) Flange Locknuts
5/16-18 UNC
(2) Hex Nuts
5/16-18
n
(2) Lock
Washers 5/16
(2) Hex Bolts
5/16-18 X 1-1/4
(1) Bottle Engine Oil
W W W
r i ^
(2) Carriage Bolts 5/16-18 UNC x 2-3/8 Gr. 5