HP 730 - Manual (Page 77)

Problem
does not take
1, . " i
when 1 press
!, iv
li
1 Possible cause
iThe camera is
i still saving the
i last picture you
i took.
! Images in the
! memory
! (internal or
¡card] may be
! corrupted.
¡Solution
(Wait a few seconds for the
(camera to finish processing the
(image, and then press the Shutter
(button.
(Format the memory. (See
i page 50)
i
1
1
1
My imag® is ¡Your subject i Use Macro mode for close-up
blurry. ! was too close to 1 shots. Do not try to get closer than
¡the camera
(the camera's minimum focus
i lens. (range (See Using macro mode on
(page 36)
! You moved the i Hold the camera steady as you
! camera while
i press the Shutter button or use a
s you took the i tripod.
j picture.
i
1
¡The light is low (In dim light, the camera requires
jand the flash is (a longer exposure. Use a tripod
i set to Flasl't Off.(to hold the camera steady,
\
(improve lighting conditions, or
\
(the flash To Flash On (see
\
(page 30).
sThe camera (Use Focus Lock. (See page 23.)
(focused on the
\
(wrong thing, or
(was unable to
(focus.
chapter 7: Troubleshooting and support 79