Craftsman 944.514610 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TABLE OF CONTENTS
Warranty Statement
Identification of Symbols
Safety Rules
Assembly
Operation
7 Parts List
Center Section
9 Parts and Ordering Back Cover
WARRANTY STATEMENT
LIMITED TWO (2) YEAR WARRANTY ON CRAFTSMAN® PRUNER
ATTACHMENT
For two (2) years from the date of purchase, Sears Canada, Inc., will repair or
replace free of charge, at Sears option, parts which are defective as a result of
material or workmanship,
COMMERCIAL OR RENTAL USE:
Warranty on Pruner Attachment will be 90 days from the date of purchase if used
for commercial or rental purposes.
This warranty excludes expendable parts that become worn during normal use.
Warranty service is available by returning the Pruner Attachment to the nearest Sears
Service Centre/Department in Canada. This warranty applies only white this product
is in use in Canada.
This warranty is in addition to any statutory warranty and does not exclude or limit
legal rights you may have but shall run concurrently with applicable provincial
legislation. Furthermore, some provinces do
NOT
allow ¡imitations on how long an
implied warranty will last, so the above limitations may not apply to you.
Sears Canada, Inc., Toronto, Ontario MSB 2B8
IDENTIFICATION OF SYMBOLS
DANGER!
This pruner can
be dangerous! Careless or im
proper use can cause
serious or even fatal injury.
Read and understand the
instruction
manual
before
using the pruner.
Always wear appropriate ear protection, eye protection and head protection.
DANGER!
Falling objects can cause severe head injury. Wear head
protection when operating this unit. Do not stand beneath branch being
cut.
SAFETY RULES
a WARNING;
When using an
electric pruner or any other electric
gardening appliance, basic safety pre
cautions must always be followed to
reduce the risk of fire, electric shock,
and serious injury. Read and follow all
instructions.
^WARNING: Always disconnect
spark plug wire and place wire where it
cannot contact spark plug {or discon
nect powerhead from power source) to
prevent accidental starting when setting
up, transporting, adjusting or making re
pairs except carburetor adjustments.