Mowing tips, Mulching mowing tips – Craftsman 917.271142 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MOWING TIPS

• Mower should be properly leveled for

best mowing performance. See “TO
LEVEL MOWER HOUSING” in the
Service and Adjustments section of this

manual.

• The left hand side of mower should be

used for trimming.

• Drive so that clippings are discharged

onto the area that has been cut. Have

the cut area to the right of the tractor.

This will result in a more even distribu­
tion of clippings and more uniform

cutting.

• When mowing large areas, start by

turning to the right so that clippings will

discharge away from shrubs, fences,
driveways, etc. After one or two rounds,
mow in the opposite direction making
left hand turns until finished.

• If grass is extremely tail, it should be

mowed twice to reduce load and
possible fire hazard from dried clip­
pings. Make first cut relatively high; the

second to the desired height.

• Do not mow grass when it is wet. Wet

grass will plug mower and leave

undesirable clumps. Allow grass to dry
before mowing.

• Always operate engine at full throttle

when mowing

to assure better mowing

performance and proper discharge of

material. Regulate ground speed by

selecting a low enough gear to give the

mower cutting performance as well as

the quality of cut desired.

• When operating attachments, select a

ground speed that will suit the terrain
and give best performance of the
attachment being used.

r

■*

-S

r.

-

^

1

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ^

V

\

J

c

J

V

1

MULCHING MOWING TIPS

IMPORTANT;

For best performance,

keep mower housing free of built-up grass
and trash. Clean after each use.
• The special mulching blade will recut

the grass clippings many times and

reduce them in size so that as they fall
onto the lawn they will disperse into the
grass and not be noticed. Also, the
mulched grass will biodegrade quickly
to provide nutrients for the lawn.
Always mulch with your highest engine

(blade) speed as this will provide the
best recutting action of the blades.

• Avoid cutting your lawn when it is wet.

Wet grass tends to form clumps and

interferes with the mulching action. The
best time to mow your lawn is the early
afternoon. At this time the grass has
dried and the newly cut area will not be
exposed to the direct sun.

• For best results, adjust the mower

cutting height so that the mower cuts off
only the top one-third of the grass
blades. For extremely heavy mulching,

reduce your width of cut on each pass

and mow slowly.

• Certain types of grass and grass

conditions may require that an area be
mulched a second time to completely
hide the clippings. When doing a
second cut, mow across or perpendicu­

lar to the first cut path.

• Change your cutting pattern from week

to week. Mow north to south one week
then change to east to west the next

week. This will help prevent matting
and graining of the lawn.

16

Advertising