Muffler, Spark plugs, In-line fuel filter (see fig. 15) – Craftsman 917.25650 User Manual
Page 19: Spark plug(s), Customer responsibilities
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CUSTOMER RESPONSIBILITIES
MUFFLER
Inspect and replace corroded muffler and spark arrester (if
equipped) as it could create a fire hazard and/or damage.,
SPARK PLUGS
Replace spark plugs at the beginning of each mowing
season or after every 100 hours of operation, whichever
occurs first. Spark plug type and gap setting are shown in
“PRODUCT SPECIFICATIONS” on page 3 of this manual.
IN-LINE FUEL FILTER (See Fig. 15)
The fuel filter should be replaced once each season. If fuel
filter becomes clogged, obstructing fuel flow to carburetor,
replacement is required.
» With engine cool, remove filter and plug fuel line
sections.
» Place new fuel filter in position in fuel line with arrow
pointing towards carburetor.
•> Be sure there are no fuel line leaks and clamps are
properly positioned.
» Immediately wipe up any spilled gasoiine.
CLEANING
» Clean engine, battery, seat, finish, etc., of all foreign
matter,
« Keep finished surfaces and wheels free of all gasoline,
oil, etc.
• Protect painted surfaces with automotive type wax.
We do not recommend using a garden hose to clean your
tractor unless the electrical system, muffler, air filter and
carburetor are covered to keep water out. Water in engine
can result in a shortened engine life.,
19