Craftsman 137.248850 - Manual (Page 2)

TABLE OF CONTENTS
SECTION
Warranty...........................................
Product Specifications.....................
Power Tool Safety...........................
Table Saw Safety.............................
Electrical Requirements and Safety..
Accessories and Attachments.........
Tools Needed For Assembly...........
Carton Contents...............................
PAGE SECTION
2 Know Your Table Saw.................
2 Glossary of Terms..............
3 Assembly and Adjustments.
4 Operation...................
5 Maintenance..............
6 Troubleshooting Guide...
6 Parts List.....................
6 Push Stick Plan........... ........
PAGE
8
9
10
17
22
23
24
28
WARRANTY
ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL
If this Craftsman tool fails due to a defect in material or workmanship within one year from the date of purchase,
CALL 1-800-4-MY-HOME® TO ARRANGE FOR FREE REPAIR (or replacement if repair proves impossible).
If this tool is used for commercial or rental purposes, this warranty will apply for only ninety days from the date of
purchase. This warranty applies only while this tool is in the United States.
This warranty gives you specific legal rights, and you may also have other rights, which vary, from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
A WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicais known to cause cancer, birth defects or other reproductive harm. Some exampies of these
chemicais are:
• Lead from iead-based paints
® Crystaiiine siiica from bricks, cement and other masonry products
« Arsenic and chromium from chemicaily treated iumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicais, work in a weii ventiiated area and work with approved safety equipment such as
dust masks that are specialiy designed to filter out microscopic particies.
PRODUCT SPECIFICATIONS
MOTOR
Type.......................................................... Universal
Amps.......................................................... 15
Voltage....................................................... 120
Hz............................................................... 60
RPM (no load)........................................... 5000
SAW
Rip Capacity With Extension.......30 in. Right & 18 in. Left
Blade Size................................... 10 in.
Blade Arbor Size...........................5/8 in.
Maximum Cut Depth @ 90°........ 3 in.
Maximum Cut Depth @ 45°........ 2-1/2 in.
Maximum Diameter Dado........... 6 in. (Stackable only)
Maximum Dado Cut Width.......... 1/2 in.
A
WARNING
To avoid eiectricai hazards, fire hazards or damage to the tool, use proper circuit protection.
This tool is wired at the factory for 110-120 Voit operation, it must be connected to a 110-120 Voit /15 Ampere
time deiay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or
damaged in any way.
Before using your tool, it is critical that you read and understand these safety rules. Failure to follow these
rules could result in serious injury to you or damage to the tool.