Installation of hopper and upper gutlde extension – Craftsman 247.796890 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Happer
Lower Leef
Rarnp Section
INSTALLATION OF HOPPER AND UPPER GUtlDE
EXTENSION
T The lower leaf ramp section on the chipper-shred
der is placed in an upright position for shipping
purposes Lower this section-
2----Place the hopper in position on the shredder
-----See figure 3. Start all four hex washer head seif
tapping screws fCi. 'then tighten securely using a
1/2" socket wrench
FIGURE 3
Assemble the keepers (Dl to the sides of the unit
with two hex washer head self-tapping screws (Ci,
using a 1/2" socket wrench. Tighten securely
Lower Leaf
Ramp Section
" Upper Leaf
Ramp Section
Place upper leaf ramp section inside the lower ieaf
ramp section Secure with four hex bolts iA! and
hex lock nuts IBI- Tighten securely See figure 5,
FIGURE S,