Craftsman 139.53675SRT - Manual (Page 38)

Accessi
Sears offers rr
Sears model ni
lany useful accessories for your garage door opener. They are IHusirated below vi Ith
jmbers and descriptions. '
139.S3702 Emergency Key Release:
Required for a garage with NO
access door. Enables homeowner
to open garage door manually from
outside by disengaging trolley.
139.53681 SECyRITY'f 3-Function Remot
Control:
Includes visor clip.
139.53703 Outdoor Key Switch:
Operates the garage door
automalicaily frcHn outside when
remote control is not handy.
139.53680
SECURITY^ Compact
3*Futiction Remote Control:
With loop for attaching key ring.
(Available April, 1997)
139.53684
SECURITY-«- Keyless Erriry:
Enables homeowner to operate garage
door opener from outside by entering a
password. Also can add a temporary
password for visitors or service
persons. This temporary password can
be iimfted to a programmable number
of hours or entries.
139.53704 8 Foot Rail Extension
To allow »t 8 foot door to c^n fiilly
139.53705 10 Foot Rail Extension:
lb allow a 10 foot door to open fully
139. 53686
©
1
^
Plug-In Light Control:
Enables homeowner to turn on a
lamp, television or other appliance
from car, bedside, or anywhere In
the home with a remote.
(Available April, 1997)
Support Brackets:
For finished ceilings or where
additional support is required,
based on garage construction,
includes brackets and fastening
hardware.
139.53709 Door Clearance Brackets:
(For Sectional Doors On/yf
Replaces top brackets and rollers on
door to reduce height of door travel.
For use when installing opener in
garage vdth low headroom clearance.
....... .................................. ..................
To Add the
We recommend that you program your password
before you Install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before Installation.
If you have a Premium Control Console:
With the door closed, press the four digit password
desired, then press and hold Enter.
Press and hold the light button on the door contra).
Press and hold the door control push bar-
Afterthe opener light flashes, release all buttons.
Keyless Entry
If you do not have a Premium Control Console:
1. Choose a4-digit password using numbers from
0 to 9 {a number can be used more than once, for
example, 4, 0,
4, 1).
2. Press the four buttons for the password, then
press and hold the Enter button. The indicator light
on the door opener panel will blink.
3. Press and release the SRT (team) button on the
opener panel After the opener light flashes,
release the Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
38