Chamberlain 81LM User Manual

Owner's manual, Model 83lm multi-function remote control, Model 81lm single-function remote control

Advertising
background image

"SMART" GARAGE DOOR OPENERS

(With Green "SMART" Button

and Green Indicator Light)

Model 83LM
Multi-Function Remote Control

PROGRAM THE OPENER TO ACCEPT THE
REMOTE CONTROL CODE

Select a remote control push button to operate the
opener. The large button is recommended for use
with a garage door opener.

1. Press and hold the selected remote control push

button (Figure 1).

2. Then press and release the green "SMART" button

on the opener panel (Figure 2). The opener light
will flash once. Release the remote control push
button.

Now the opener will operate when the remote push
button is pressed.

NOTE: If you release the remote control push
button before the opener light flashes, the
receiver has not accepted the code.

To Erase All Transmitter Codes

• Press and hold the "SMART" button on the opener

panel until the indicator light turns off (about 6
seconds). ALL the codes the opener has learned
will be erased.

• To reprogram, repeat Steps 1 and 2 for each remote

control in use. Code programming instructions
are also located on the opener panel.

Select a remote control

push button to operate opener

Push

Button

Garage Door Opener

(With Green "SMART" Button)

Green

"Smart"

Button

Green

Indicator

Light

KG

KG

1

3

9

7

5

1

3

9

7

5

1

2

3

Owner's Manual

© 1996, Chamberlain Group Inc.

114A2017

All Rights Reserved

Printed in Mexico

Children operating or playing with a garage door
opener can injure themselves or others. The garage
door could close and cause serious injury or death.
Do not allow children to operate the wall push
button(s) or remote control(s).

A moving garage door could injure or kill someone
under it. Activate the opener only when you can see
the door clearly, it is free of obstructions, and is
properly adjusted.

ADVERTENCIA

PRECAUCION

ADVERTENCIA

ADVERTENCIA

WARNING

Model 81LM
Single-Function Remote Control

Single-Function remote case, cover, screw

(circuit board not included) Model 81LM

. . . . . . . . . . . .

41A3984-7

12 Volt battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10A14

Multi-Function remote case, cover, screw

(circuit board not included) Model 83LM

. . . . . . . . . . . .

41A3888-7

12 Volt battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10A14

Figure 1

Model 83LM

Model 81LM

Figure 2

Programming instructions are described and illustrated below. The additional push buttons on the
Multi-Function Remote Control can also activate other garage door openers and/or light controls.
(Instructions for programming light products are included with those accessories.)

FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1-800-528-9131

The 80 Series remote control (with green battery test light) works only with door openers and light
controls having a green "SMART" button and a green indicator light.

©

Replacement Parts

FCC/DOC rules prohibit adjustments to or modification of receiver and/or transmitter circuitry except for changing the code setting and/or
replacing the transmitter battery. THERE ARE NO USER SERVICEABLE PARTS.

Advertising
Table of contents