To adjust steering wheel alignment, Front wheel toe-in/camber, To remove wheel for repairs (see fig. 28) – Craftsman 917.259592 User Manual
Page 25: Service and adjustments
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SERVICE AND ADJUSTMENTS
TO ADJUST STEERING WHEEL ALIGNMENT
II steering wheel crossbars are not horizontal (left to right)
when wheelsare positioned straightforward, remove steer'
ing wheel and reassemble per instructions in the Assembly
section of this manual.
FRONT WHEEL TOE-IN/CAMBER
The front wheel toe-in and camber are not adjustable on
your tractor. If damage has occurred to affect the front
wheel toe-in or camber, contact your nearest authorized
service center/department.
TO REMOVE WHEEL FOR REPAIRS
(See Fig. 28)
Block up axle securely..
Remove axle cover, retaining ring and washers to atiow
wheel removal (rear wheei contains a square key - Do
not lose).
Repair tire and reassemble.
On rear wheels only; align grooves in rear wheel hub
and axle. Insert square key.
Replace washers and snap retaining ring securely in
axle groove.
Replace axle cover.
NOTE: To seal tire punctures and prevent flat tires due to
slow leaks, tire sealant may be purchased from your local
parts dealer. Tire sealant also prevents tire dry rot and
corrosion.
WASHERS
RETAINING
RING\
AXLE COVER
SQUARE KEY (REAR
WHEEL ONLY)
FIG. 28
25