Using the snow blade, Maintenanc – Craftsman 486.24441 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Wheel weights and tire chains must be used with
your snow blade for traction. These accessories are
a¥ailable at your nearest Sears retail store.
Using the Snow blade
•
Prepare the lawn tractor engine for cold weather using
instructions furnished with the lawn tractor.
•
Always begin with the transmission in first (low) gear
and gradually increase speed as required.
•
Do not repeatedly push snow in the same direction.
This causes excessive build up with each successive
pass.
A
CAUTION: Carefully inspect the area
to be worked before operating the snow
blade. Avoid pipes, roots, curbs or other
heavy obstructions.
A
CAUTION: Know the terrain. Avoid
exceptionally steep slopes or drop-offs
which may be hidden by the snow.
Never run the snow blade into heavy
material at high speed.
To reduce icing on the blade, allow the lawn tractor
and blade to adjust to outdoor temperature before
operating.
For improved snow removal performance, coat the blade
with automotive type paste wax.
A
CAUTION: Always lower the blade to
the ground before leaving the tractor.
MAINTENANC
CUSTOMER RESPONSIBILITIES
Read and follow the maintenance schedule and the
procedures listed in the maintenance section.
MAINTENANCE SCHEDULE
Fill in dates as you .
complete reguiar
service.
Service
Dates
Check for loose fasteners
X
Check for worn
or damaged
parts
X
Clean Blade
X
X
Lubricate Blade
X
CHECK FOR LOOSE FASTENERS
•
During the operating season, check all bolts, nuts and
hairpin cotters to be sure they are secure.
CHECK FOR WORN OR DAMAGED PARTS
•
During the operating season, check for worn and
damaged parts. Replace or repair any that have
excessive damage or wear.
CLEAN BLADE
•
During the operating season, clean the blade off after
each use. Touch up any bare metal with paint or
apply a light coat of grease or rust preventive.
LUBRICATE BLADE
•
Lubricate all pivot points to help maintain proper
operation of blade. Use grease packet furnished with
the snow blade for lubrication of the upper portion of
the lift handle rod.
12