Craftsman 247.775870 - Manual (Page 5)

ASSEMBLY
REMOVE CHIPPER-SHREDDER
FROM CARTON
• Cut the corners of the carton.
• Remove all packing inserts,
• Remove all loose parts including owner’s
manual. See figure 1.
• Roll chipper-shredder out of the carton,
• Make certain all parts and literature have been
removed before the carton is discarded.
LOOSE PARTS
{Refer to figure 1.)
a. Hopper Assembly
b. Discharge Chute
c. Catcher Bag
d. Bottle of Oil
e. Safety Glasses (not shown in figure 1)
f. Owner's Manual (not shown in figure 1)
g. Chipper Chute
TOOLS REQUIRED
1. 1 /2" or Adjustable Wrenches
2. 7/16" or Adjustable Wrenches
3. 9/16" or Adjustable Wrenches
4. Funnel
DISCONNECTING SPARK PLUG
• Disconnect the spark plug wire and move it
away from the spark plug before assembling the
chipper-shredder. See figure 2.
or oil in the engine. After assembly, see OPERATION
section of this manual for proper fuel and engine oil
fill-up.
NOTE: To determine right and left hand sides of your
chipper-shredder, stand behind the unit with the
engine farthest away from you.
Your chipper-shredder has been completely assembled
at the factory, except for the hopper assembly,
discharge chute and the catcher bag.
These parts are shipped loose in the carton. A pair of
safety glasses and a bottle of oil are also included in
the carton.
Figure 2