Casio CLASSPAD 330 3.04 - Manual (Page 418)

20060301
Viewing Regression Calculation Results
To view regression calculation results, tap [Calc] on the menu bar and then tap the type of
calculation results you want.
7-7-3
Performing Statistical Calculations
• You can also use the [DispStat] option to display the last calculated statistical results. For
details about regression calculation results, see “7-5 Graphing Paired-Variable Statistical
Data”.
Residual Calculation
Residual calculation calculates the distance (residual) between the regression model and an
actual plotted point (
y -coordinates) during regression calculations.
S ClassPad Operation
(1) / 
(2) Input the data you want into a list.
(3) Tap [Calc] and then [Linear Reg].
(4) On the dialog box that appears, tap the [Copy Residual] down arrow button, and then
select [On] or the list into which you want to copy the residual values.
• Values assigned to the “residual” system variable shows the vertical distances between
actually plotted points and the regression model.
• A positive value indicates a plot that is higher than the regression model, while a negative
value indicates a plot that is lower.
• Whenever the [Copy Residual] setting is configured as described above, the ClassPad
automatically assigns residual data to a system variable named “residual” when you
perform a regression calculation. You can use the following procedure to view the current
“residual” system variable values.
Linear regression Linear Reg
Med-Med MedMed Line
Quadratic regression Quadratic Reg
Cubic regression Cubic Reg
Quartic regression Quartic Reg
Logarithmic regression Logarithmic Reg
Exponential regression ( y = a · e b · x ) Exponential Reg
Exponential regression ( y = a · b x ) abExponential Reg
Power regression Power Reg
Sinusoidal regression Sinusoidal Reg
Logistic regression Logistic Reg
Tap this option: To view these calculation results: