Using your lawn mower, Using grass catcher, Height adjustment – Craftsman 247.388250 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using Your Lawn Mower

Your mower is designed to operate as a mulching or a

rear bagger unit.

For converting from a mulcher to a rear bagger
unit, refer to instructions on page 8 of this
manual.

Do not operate mower without the

mulching cover or the grass catcher

properly installed and tightly secured.

Be sure that lawn is clear of stones, sticks,

wire, or other objects which could damage lawn

mower or engine. Such objects could be
accidently thrown by the mower in any direction
and cause serious personal injury to the
operator and others.

For best results, do not cut

wef grass because

it tends to stick to the underside of the mower,
preventing proper discharge of grass clippings,
and could cause you to slip and fall. New grass,

thick grass or wet grass may require a

narrower cut.

The

best mowing pattern

is one that allows the

clippings to discharge towards the uncut part of
the lawn. This permits recutting of the clippings

to further pulverize them. When cutting high

weeds, discharge towards cut portion, then
recut at right angles to first direction,

Fora

healthy lawn,

always cut off one-th i rd or

less of the total length of the grass. Lawn should
be cut in the fall as long as there is growth.

WARNING:

If the mower strikes a foreign

object,

stop the engine.

Disconnect spark

plug wire and ground against post.

Thoroughly inspect the mower for any

damage. Repair the damage before
restarting the mower. Extensive vibration
during operation is an indication of
equipment damage.

A

Using Grass Catcher

You can use the grass catcher bag to collect clippings
while operating the mower.

Attach the grass catcher to the mower following

instructions on page 8 of this manual.

Operate the mower till the grass catcher bag is
full, or the job has been completed whichever is
earlier.

Stop the engine completely by releasing the

blade control handle. Make sure that the unit

has come to a complete stop and the blade has

stopped rotating. Empty the grass catcher bag
as follows.

Lift the discharge door and pul! the grass bag

away from the mower. See Figure 10,

Holding the bag firmly, carry the bag away from

the mower. Dispose off the clippings
appropriately.

Chute Door

Bag Handle

Figure 10

Height Adjustment

Refer to height adjustments section of this manual on
page 16 for instruction on how to adjust the cutting
height and the handle height.
For best results in mowing, keep the cutting height
position high until it is determined which height is best

for your lawn.

11

Advertising