Craftsman 247.775890 - Manual (Page 5)

ASSEMBLY
Leaf Bag
* The hoppar is packsd
in the top insert In
your chipper'Shrertder
carton. Chip Bag
Figure 1
Spark Plug Wire
Figure 2
IMPORTANT: This unit is shipped without gasoiine
or oil in the engine. After assembly, see
OPERATION section of this manuai for proper fuel
and engine oil fill-up,
NOTE: To determine right and left hand sides of your
chipper-shredder, stand behind theunit with the
engine fardiest away from you. See Figure 1 inset.
Your chipper-shredder has been completely
assembled at the factory, except for the hopper
assembly, chipper chute, discharge chute and the
catcher bag. These parts are shipped loose in the
carton. A pair of safety glasses and two bottles of oil
are also included in the carton.
Remove From Carton
• Cut the comers of the carton. Remove all
packing inserts. Remove all loose parts
including owner’s manual. See Figure 1,
• Roll chipper-shredder out of the carton.
• Make certain all parts and literature have been
removed before the carton is discarded.
Loose Parts
(Refer to Figure 1.)
a. Hopper Assembly
b. Discharge Chute
c. Chipper Chute
d. Leaf Bag, chip bag
e. Bottle of Oil (2)
f. Safety Glasses (not shown in Figure 1}
g. Owner’s Manual (not shown in Figure 1)
Tools Required
1. 1 /2' or adjustable wrenches
2. 7/16" or adjustable wrenches ^
3. 9/16” or adjustable wrenches
4. Funnel
Disconnecting Spark Plug
• Disconnect the spark plug wire and move it
away from the spark plug before assembling the
chipper-shredder. See Rgure 2.
Attaching Discharge Chute
• Remove the wing knobs from each side of the
discharge opening on tine chipper-shredder.
• Using two 7/16" wrenches, remove hex lock nut,
two spacers, and the hex bolt from top of the
housing assembly. For easy assembly, do not
remove the second spacer from the hex bolt.
• Fierce the discharge chute in position on the
discharge opening as shown in step 1 in Figure
3. Insert hex bolt and ^acer through hinge on
discharge chute and housing (spacer fits inside
of hinge). See Figure 3 irtset A.