Assembly, Safety notice, Chain brake – Craftsman 358.351810 User Manual

Page 6: Spark arresting screen, Standards, Carton contents

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

This unit is not equipped with an anti­

vibration system and is intended for

occasional use only,

SAFETY NOTICE;

Exposure to vibra­

tions through prolonged use of gasoline

powered hand tools could cause biood

vessel or nerve damage in the fingers,

hands, and joints of people prone to

circulation disorders or abnormal swell­

ings. Proîonged use in coîd weather has

been linked to blood vessel damage in

otherwise healthy people, if symptoms

occur such as numbness, pain, loss of

strength, change in skin color or texture,

or loss of feeling in the fingers, hands, or

joints, discontinue the use of this tool

and seek medical attention. An anti-vi­

bration system does not guarantee the

avoidance of these problems. Users

who operate power tools on a continual

and regular basis must monitor closely

their physical condition and the condition

of this tool.

CHAIN BRAKE:

if this saw is to be

used for commercial logging, a chain

brake is required and shall not be re­

moved or otherwise disabled to com-

piy with Federal OSHA Regulations for

Commercial Logging.

SPARK ARRESTING SCREEN:

Your

saw is equipped with a temperature

limiting muffler and spark arresting

screen which meets the requirements

of California Codes 4442 and 4443.

Ail U.S, forest land and the states of

Caiifornia,

Idaho,

Maine,

Minnesota,

New

Jersey,

Oregon,

and

Washington

require by law that many internal com­

bustion

engines

to

be

equipped

with a

spark

arresting

screen.

If

you

operate

a chain saw in a state or locale where

such

regulations

exist,

you

are

legally

responsible

for

maintaining

the

operat­

ing condition of these parts. Failure to

do so is a violation of the law. Refer to

the

Customer

Responsibilities

chart

in

the MAINTENANCE section.

STANDARDS:

This chain saw is listed

by Underwriters Laboratories, Inc. in ac­

cordance with American National Stan­

dards for Gasoiine-Powered Chain

Saws Safety Requirements (ANSI

B175,1-2000).

ASSEMBLY

^WARNING: Before using chain

saw, ensure al fasteners are secure,

CARTON CONTENTS

Check carton contents against the fol­

lowing 1st.

Mode! 358.351810

• Chain saw (fully assembled)

• 2-cycle engine oil

Examine parts for damage. Do not use

damaged parts.

If you need assistance or find that parts

are missing or damaged, please cal!

1-800-235-5878.

NOTE:

It is normal to hear the fuel filter

rattle in an empty fue! tank.

Your unit has been factory tested and

the carburetor precisely adjusted. As a

result you may smell gasoline or find a

drop of oil/fue! residue on the muffler

when you unpack the unit,

ASSEMBLY

Your saw is fully assembled; no

assembly is necessary.

Advertising