Craftsman 358.748200 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING TABLE
A WARNING:
Always stop unit and disconnectfrom the power source before
performing all of the recommended remedies below except remedies that re
quire unit to be operating.
SYMPTOM
CAUSE
REMEDY
Unit fails to
operate.
1. Switch in the OFF position.
2. Extension cord discon
nected.
3. Circuit breaker tripped, or
fuse blown.
4. Mechanical failure
1. Slide switch to ON position.
2. Reconnect extension cord.
3. Reset circuit breaker or
fuse.
4. Contact Sears Service
(see back cover).
Unit
vibrates
abnormally.
1. Mechanical failure
1. Contact Sears Service
(see back cover).
Impeller will
not turn
freely.
1. Debris in air intake area.
2. Mechanical failure.
1. Clean unit. Remove any
debris.
2. Contact Sears Service
(see back cover).