Engine engine speed, Lawn mower, Storage – Craftsman 917.388732 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ENGINE
ENGINE SPEED

Your engine speed has been factory set.
Do not attempt to increase engine speed
or it may result in personal injury. If you
believe that the engine is running too fast
or too slow, take your lawn mower to a

Sears or other qualified service center for

repair and adjustment.

CARBURETOR
Your cartiuretor is not adjustable. If your
engine does not operate properly due to
suspected carburetor problems, take your
lawn mower to a Sears or other qualified
service center for repair and/or adjust­
ment.
IMPORTANT: Never tamper with the
engine governor, which is fectory set for

proper engine speed. Overspeeding the

engine above the factory high speed
setting can be dan^rous. If you think the

engine-governed high speed needs
adjusting, contact a Sears or other
qualified service center, which has proper
equipment and experience to make any
necessary adjustments.

STORAGE

Immediately prepare your lawn mower for

storage at the end of the season or if the

unit will not be used for 30 days or more.

LAWN MOWER

When lawn mower is to be stored for a
period of time, clean it thoroughly, remove
all dirt, grease, leaves, etc. Store in a
clean, dry area.

1. Clean entire lawn mower (See

"CLEANING" in the Maintenance

section of this manual).

2. Lubricate as shown in the Mainte­

nance section of this manual.

3. Be sure that all nuts, bolts, screws,

and pins are securely fastened.

Inspect moving parts for damage,
breakage and wear. Repiace if
necessary.

4.

Touch up all rusted or chipped paint

surfaces; sand lightly before painting.

HANDLE

You can fold your lawn mower handle for
storage.

1, Loosen the two (2) handle knobs on

sides of the upper handle and allow

handle to fold dovwi to the rear.

2. Squeeze the bottom ends of lower

handle toward each other until pins in
handle clear the brackets and pivot
entire handle assembly fonvard and
allow it to rest on mower.

• When setting up your handle from the

storage position, the lower handle will
require manually locking into the
mowing position.

IMPORTANT: When folding the handle

for storage or transportatfon, be sure to
fold the handle as shown or you may

damage the control cables.

Operator presence

14

Advertising