Craftsman 315.108490 - Manual (Page 6)

PRODUCT SPECIFICATIONS
Horsepower
Input
Blade Diameter
Blade Arbor
Cutting Depth at 0° Bevel Cut
2-1/4
12 Amperes
7-1/4 in. {184 mm)
5/8 in. (16 mm)
2-3/8 in, (60 mm)
Cutting Depth at 45° Bevei Cut 1 -13/16 in. (46 mm)
Cutting Depth at 51.5° Bevel Cut 1-5/8 in. (41 mm)
Rating 120 volts, 60 Hz, AC
No Load Speed 5,000 RPM
UNPACKING
Your circular saw has been shipped completely
assembled except for the blade. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. If any parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts before attempting to operate saw. A
blade, blade wrench, and this owner's manual are also
included.
WARNING; If any parts are mis-sing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
ACCESSORIES
The following recommended accessories are currently available at Sears Retail Stores.
■ 7-1/4 in. 40 Tooth General Purpose Cut-Off Blade
■ 7-1/4 in. 35 Tooth Master Combination Blade
■ 7-1/4 in. 200 Tooth Plywood Blade
■ 7-1/4 in. 18 Tooth Carbide Blade
■ 7-1/4 in. 18 Tooth Mach II Silver Series Carbide Blade
■ 7-1/4 in. 24 Tooth Mach II Silver Series Carbide Blade
■ 7-1/4 in, 24 Tooth Combination Carbide Blade
■ Rip Guide
^ WARNING: The use of attachments or accessories not listed might be hazardous.