Using your unit – Craftsman 358.748220 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MINIMUM WIRE GAUGE
RECOMMENDATIONS
VOLTS 25 FT.
50 FT.
100 FT.
120
16
16
14
A.W-G.*
A.W.GT
A.W-G*
*Atnerìcan Wire Gauge
Secure the extension cord to the unit by
threading the cord through the cord re
tainer (see illustration). Insert the cord
receptacle into the recessed plug.
CAUTION:
Failure to use cord retain
er could result in damage to the unit,
extension cord, or both.
USING YOUR UNIT
KNOW YOUR ELECTRIC BLOWER
READ THIS OPERATOR’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT.
Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
ON/OFF SWITCH
The
ON/OFF SWITCH is used to acti
vate the motor.
INLET COVER LATCH
The
INLET COVER LATCH
is used to
open and close the inlet cover and to
secure the upper vacuum tube to the
blower unit.
BLOWER TUBE
The
BLOWER TUBE
is designed to di
rect the flow of air.
INLET RESTRICTOR
The
INLET RESTRICTOR
improves
the
blower function.
TUBE RELEASE BUTTON
The
TUBE RELEASE BUTTON
secures
the blower tube or elbow tube to the
blower unit during operation. Also,
pressing the tube release button allows
removal of the blower tube or elbow
tube.