Important – Craftsman 917.270660 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCELEFWION TEST
• Move throttle control lever from slow to
fast position. If engine hesitates or dies,
turn idle mixture valve
out
(counter
clockwise) 1/8 turn. Repeat test and
continue to adjust, if necessary, until en
gine accelerates smoothly.
High speed stop is factory adjusted. Do
not adjust - damage may result.
IMPORTANT:
Never tamper with the en
gine governor, which is factory set for
proper engine speed. Overspeeding the
engine above the factory high speed set
ting can be dangerous, if you think the en
gine-governed high speed needs adjust
ing, contact your nearest authorized ser
vice center/department, which has proper
equipment and experience to make any
necessary adjustments.
Idle Speed
Screw
Throttle
Lever
Limiter
28