Service – Craftsman 136.748270 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

the fabric of the bag, such as wires,
staples, nails, or rocks

— - S ’ GOOSJSI

Important; Vacuum only leaves and soft
items. Hard items such as sticks, rocks,
acorns, and pine cones will damage the
impeller

Important: Do not force the vacuum tube
into a pile of debris or hold the tube upright

while force feeding debris into the tube.

Either action may clog and damage the
impeller. If the vacuum starts to vibrate or
make abnormal noise, stop it, unplug the
cord, and check for the cause,

Emptying the Bag

1, Turn off and unplug the vacuum from

the power source.

2. Unzip and empty any debris from the

bag.

-

Do not store debris in the bag. To clean

the bag, turn it inside out and shake out
any excess debris , Once a year, hand
wash the bag in soapy water and allow
it to air dry,

A DANGER: Normal usage of the

bag causes it to wear and deteriorate
over time. A worn or deteriorated
bag allows small objects to be
thrown through the bag, possibly
injuring the operator or bystanders.

Check the bag frequently. If it is
worn or deteriorated, replace it with
a genuine Craftsman vacuum bag;
refer to the Replaceable Parts List

SERVICE

Double>insulated Appliances

In a double-insulated appliance, two

systems of insulation are provided instead
of grounding. No grounding means is

provided on a double-insulated appliance,
nor should a means for grounding be

added to the appliance Servicing a
double-insulated appliance requires
extreme care and knowledge of the
system, and should be done only by the
qualified service personnel at your Sears
Service Center {refer to the back cover),

Replacement parts for a double-insulated

appliance must be identical to the parts they
replace, A double-insulated appliance is
marked with the words “Double Insulation"
or "Double Insulated." The symbol {square
within a square)

D

may also be marked on

the appliance.

Removing

Clogged

Debris

from

the

Impeller

1,, Turn off and unplug the vacuum from

the power source and wait for ail
moving parts to stop.

Advertising