1 troubleshooting – Craftsman 315.228310 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1 TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Rip fence does not move smoothly.
1. Rip fence is not mounted cor
rectly.
1. Remove and reposition the rip
fence. See Aligning Rip Fence
and Front Rail in the Assembly
section.
2. Rails are dirty or sticky.
2. Clean and wax the rails.
Wood edges away from rip fence
when ripping.
1. Rip fence is misaligned.
1. See the Assembly section for
Checking Rip Fence and Blade
Alignment and Aligning Rip
Fence and Front Rail
procedures.
CRDFTSMflN' TABLE SAW 315.228310
44
Advertising