Cleaning, Eijg, L?£fonsibiuties – Craftsman 536.797500 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING
Always remove the dirt and debris from the mini tiller/
cultivator after each use (see Fig, 11) Remove atiy
string, wire or vegetation that may become lodged in the
mechanism and stop the tine rotation Proceed as fol
lows;
® Release the throttle control and move the shut-off
switch to the OFF position, then disconnect the spark
plug wire
® Remove the hairpin and clevis pin securing the tine(s)
assemb ly to I he shaft and re move the tine (s) (see Fig
11
) .
# Remove the lodged material. Reassemble the tine(s)
on the shaft and secure with a clevis pin and hairpin
@ Reconnect the sparkplug wire and restart the engine
eiJg
l?£FONSIBiUTIES
LOOGED ITEM
CLEVIS PINS
RIGHT SIDE ‘
TINES
FRONT VIEW
TINE SHIELD
LEFT SIDE
TINES
HAIRPINS
TRANSMISSION
HAIRPINS
FIG. 11
15