Craftsman 917.2720601 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TROUBLESHOOTING CHART:

See appropriate section in manuai uniess directed to Sears service center

PROBLEM

CAUSE

CORRECTION

Loss of power
(continued)

3. Build-up of grass, leaves

and trash under mower.

4. Dirty air filter.
5. Low oil level/dirty oil.

6. Faulty spark plug.

7. Dirty fuel filter.
8. Stale or dirty fuel.

9. Water in fuel.

10. Spark plug wire loose.

11. Dirty engine air screen/fins.

12. Dirty/clogged muffler.

13. Loose or damaged wiring.
14. Carburetor out of

adjustment.

15. Engine valves out of

adjustment.

3. Clean underside of mower

housing.
Clean/replace air filter.
Check oil level/change oil.
Clean and regap or change
spark plug.

Replace fuel filter.
Drain fuel tank and refill

with fresh gasoline.

Drain fuel tank and

carburetor, refill tank with
fresh gasoline and replace
fuel filter.

10. Connect and tighten spark

plug wire.

11. Clean engine air screen/

fins.

12. Clean/replace muffler.
13. Check all wiring.

14. See “To Adjust Carburetor”

in Service and Adjustments

section.

15. Contact a Sears or other

qualified service center.

Excessive

vibration

1. Worn, bent or loose blade.

2. Bent blade mandrel.

3. Loose/damaged part(s).

1. Replace blade.

Tighten blade bolt.

2. Contact a Sears or other

qualified service center.

3. Tighten loose part(s).

Replace damaged parts.

Engine continues

to run when

operator leaves
seat with
attachment
clutch engaged

1. Faulty operator-safety

presence control system.

1. Check wiring, switches and

connections. If not corrected,
contact a Sears or other
qualified service center.

Poor cut - uneven

1. Worn, bent or loose blade.

2. Mower deck not level.
3. Buildup of grass, leaves,

and trash under mower.

4. Bent blade mandrel.

5. Clogged mower deck vent

from build-up of grass,

leaves, and trash around
mandrels.

1. Replace blade. Tighten

blade bolt.

2. Level mower deck.
3. Clean underside of mower

housing.

4. Contact a Sears or other

qualified service center.

5. Clean around mandrels to

open vent holes.

Mower blades will
not rotate

1. Obstruction in clutch

mechanism.

1. Remove obstruction.

31

Advertising