Assembly – Craftsman 944.361530 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

^Look for this symbol to point out

important safety precautions. It means

CAUTION!!! BECOME ALERT!!! YOUR

SAFETY IS INVOLVED.

A CAUTION:

Muffler and other engine

parts become extremely hot during

operation and remain hot after engine

has stopped. To avoid severe burns on

contact, stay away from these areas.

A

CAUTION:

Always disconnect spark

plug wire and place wire where it cannot
contact spark plug in order to prevent
accidental starting when setting up,
transporting, adjusting or making repairs.

ASSEMBLY

Read these instructions and this manual

in its entirety before you attempt to
assemble or operate your new lawn
mower.

IMPORTANT:

This lawn mower is

shipped WITHOUT OIL OR GASOLINE in
the engine.

Your new lawn mower has been as­

sembled at the factory with the exception

of those parts left unassembled for
shipping purposes. All parts such as

nuts, washers, bolts, etc., necessary to
complete the assembly have been placed

in the parts bag. To ensure safe and

proper operation of your lawn mower, all
parts and hardware you assemble must
be tightened securely. Use the correct
tools as necessary to ensure proper
tightness.

TO REMOVE LAWN MOWER FROM

CARTON

1. Remove loose parts Included with

mower.

2. Cut down two end corners of carton

and lay end panel down flat.

3. Remove all packing materials except

padding between upper and lower

handle and padding holding operator
presence control bar to upper handle.

4. Roll lawn mower out of carton and

check carton thoroughly for additional

loose parts.

HOWTO SET UP YOUR LAWN
MOWER

TO UNFOLD HANDLE
IMPORTANT:

Unfold handle carefully so

as not to pinch or damage control cables.

1. Raise handles until lower handle

section locks into place in mowing
position. '

2. Remove protective padding, raise

upper handle section into place on
lower handle and tighten both handle
knobs.

3. Remove handle padding holding

operator presence control bar to
upper handle. .

Your lawn mower handle can be adjusted
for your mowing comfort. Refer to "Adjust

Handle" in the Sen/ice and Adjustments

section of this manual.

Advertising