Craftsman 315.273731 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Saw blade tends to push wood to
one side when cross cutting.
1. Blade is heeling.
1. See Squaring the Blade to the
Fence in Adjustments section.
2, Column tube is loose in column
support.
3. Arm is loose or misaligned.
2. See Adjusting the Column
Tube in Assemfo/y section.
3. See Setting the Arm Lock
Wheel in the AssemWy section.
4. Fence/tables are not straight.
4. Check with square; sand or
replace.
5. Blade or teeth are bent or dull
5. Sharpen or replace the blade.
See the removal procedure in
Assemb/y section.
57
CRAFTSMBN*
RADIAL SAW 315.273731
Advertising