Caller id (automatic number iden ti fi ca tion) 27, Caller id, 27, Using with caller id, 27 – Vertical Communications and FXT User Manual

Page 35: Caller id (automatic number identification)

Advertising
background image

Caller ID (Automatic Number Identification)

When installed by system programming, the Caller ID feature allows you to view

incoming call numbers before you answer them. Incoming call numbers flash in

the left half of the LCD. If the name of the calling party is available it will

display in the second half on the right side of the LCD. If you answer the call, the

number appears steady in the left half of the LCD.
The system also stores numbers that ring on your line but receive no answer. The

system indicates that it has stored ring-no answer numbers by causing the

programmed Caller-ID (CID) light on your telephone to flash. Pressing the CID

button allows you to view the stored numbers one at a time. Pressing the

programmed SAVED NUMBER REDIAL button causes the system to dial the

displayed number. If the call has been returned by someone else, selecting the T

key reveals who returned the call. Everyone sharing your line can scroll through

the stored numbers and choose which calls to return.

To scroll through ring-no answer numbers stored on your
system (CID light is flashing),

1. SELECT the CID button on your telephone. Your LCD will

display the calling number, date, and time the call came in. The

most recent call appears first in the list.

2. SELECT the CID button each time you wish to display the next

most recent ring-no answer call to your line.

3. To dial one of the numbers in the redial queue, SELECT the

SAVED NUMBER REDIAL button. The system will automati-

cally dial the number.

Depending on your system programming, when a call is returned it might remain

in the ring-no answer queue or the system might delete it from the ring-no answer

queue. Your system installer can tell you how the feature is programmed. If the

system is programmed to leave a returned number in the redial queue, the display

will show a “S” next to numbers that have been returned.

To determine who viewed the number and returned the call,

1. DIAL

*

.

Large Screen Display Speakerphone Station User’s Guide

27

GCA70-349

Answering Calls

Advertising
This manual is related to the following products: