Vertical Communications and FXT - Manual (Page 39)

Automatic Dialing
This feature provides one- or two-button speed dialing using programmable
buttons at which you have previously stored numbers. Two levels of number
storage are available at each storage location, and you can use one or both levels
as needed. Further, since you usually store a line choice as part of a speed dial
number, line selection is automatic with speed dialing.
There are two types of speed dial numbers: (1) numbers that you store for your
own use (personal speed dial numbers), and (2) numbers that the system
attendant stores for everyone’s use (system speed dial numbers).
• To automatically dial a number stored at one of the
programmable buttons on your station, choose one of the
following:
1. PRESS programmed speed dial button, OR PRESS SHIFT AND
programmed speed dial button.
• To speed dial a personal speed dial number,
1. While on hook, DIAL speed dial number on dial pad (
0
to
9
).
• To speed dial a system speed dial number,
1. While on hook, DIAL
*
AND system speed dial number.
NOTE: If you are already on a line, you must press SHIFT before dialing the
personal or system speed dial numbers that are stored at the dial pad. Also,
if a speed dial’s preselected line is in use, the speed dial will not engage.
NOTE: On some systems, due to programming action, the available system
speed dial codes are S100 - S299 and S100 - S599.
Large Screen Display Speakerphone Station User’s Guide 31
GCA70-349 Making Calls
Speed Dialing Options