Vertical Communications and FXT - Manual (Page 62)

Message Waiting Light and Messaging
If the system installer designates your LCD speakerphone to have message-wait
originate ability, you can turn on the message-waiting light of any other
telephone.
• To turn on the message-waiting light (and a broken dial
tone, if installer programmed) at another station that is idle
or busy,
1. PRESS INTERCOM.
2. DIAL
*3
.
3. DIAL extension number OR PRESS DSS/BLF button of station to
be alerted. The message-waiting light of called station will flash.
• You can also turn on the message-waiting light and broken
dial tone at another station when that station is busy,
1. HEAR the busy tone AND REMAIN on the
line.
2. SELECT MESSAGE.
3. HANG UP.
• To turn off the message waiting light at a
busy or idle station,
1. PRESS INTERCOM.
2. DIAL
#3
.
3. DIAL extension number OR PRESS DSS/BLF
button of station that was alerted. The message-waiting light of
called station will turn off.
• To turn off the message-waiting light during
message-delivering conversation,
1. PRESS INTERCOM once if off-hook, twice if on-hook.
54 Large Screen Display Speakerphone Station User’s Guide
Nonverbal Messaging GCA70-349
Wednesday 19 11:36am
Calling J Smith
CALLBK MSG