Vertical Communications and FXT - Manual (Page 77)

Do Not Disturb Condition
This feature keeps calls from ringing at your LCD speakerphone and makes your
station appear to be busy to intercom calls. As a reminder, a station that is set in
Do Not Disturb mode will display this information on the LCD.
• To enable DND, proceed as follows:
1. SELECT OPTIONS.
2. SELECT Programming.
3. SELECT Do Not Disturb.
4. SELECT Do Not Disturb interact button to
toggle between ON and OFF.
5. SELECT EXIT.
• To disable the DND condition,
1. REPEAT the above procedure, BUT SELECT OFF instead of
ON at step 4.
• To set a Do Not Disturb condition at your telephone when a
call rings at your station,
1. Hear ringing and notice incoming call infor-
mation in display.
2. SELECT OPTIONS.
3. SELECT Programming.
4. SELECT Do Not Disturb.
5. SELECT Do Not Disturb interact button.
Ringing will stop, caller will hear the do not
disturb tone, and your telephone will remain in
DND until you disable the feature (described
above).
6. SELECT EXIT.
Large Screen Display Speakerphone Station User’s Guide 69
GCA70-349 Other Advanced Features
Background Music
PREV NEXT EXIT
Voice Announce Block
Do Not Disturb
Contrast Level
1
OFF
ON
6
Background Music
PREV NEXT EXIT
Voice Announce Block
Do Not Disturb
Contrast Level
1
OFF
ON
6