Vertical Communications and FXT - Manual (Page 86)

Volume Control
Setting Current Volume Level
The volume control on your telephone is a multipurpose control you can use to
set the volume (loudness) of the ringer, the speaker, the handset, the headset,
background music, and the group listening mode.
• There are four ringer loudness levels
(plus an off position). Set these levels
as follows:
1. While your telephone is on-hook and idle,
PRESS the VOLUME UP OR VOLUME
DOWN button once for each change in
loudness you desire. The ringer sounds
once for each change as an example of
the current setting.
NOTE: If you set the ringer to the OFF position, your telephone will sound a
short ring burst once for each call you receive at your station while the
ringer is off.
• There are eight speaker loudness levels. Set these levels
for the current call as follows:
1. While on a call and in speakerphone mode, PRESS the VOLUME
UP OR VOLUME DOWN button once for each change in loudness
that you desire.
• There are at least eight handset loudness levels that you
can set for the current call as follows:
1. While on a call and in handset mode, PRESS the VOLUME UP OR
VOLUME DOWN button once for each change in loudness that you
desire.
NOTE: When the call ends, the system resets the loudness of all future calls
to the programmed (default) setting. For instructions in setting your
speakerphone’s default volume, see the next section of this chapter.
78 Large Screen Display Speakerphone Station User’s Guide
Other Advanced Features GCA70-349
Impact SCS 8412S and 8412F
Volume Buttons