Product specifications, Unpacking, Accessories – Craftsman 315.269600 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRODUCT SPECIFICATIONS
Blade Diameter
Blade Arbor
Cutting Depth at 0° Bevel Cut
Cutting Depth at 45° Bevel Cut
5-1/2 in.
3/8 in.
1-9/16 in.
1-1/8 in.
No Load Speed
Motor
Charge Rate
Charger Rating
3,800 RPM
14.4 Volts DC
1 Hour
120 volts, 60 Hz, AC
UNPACKING
Your trim saw has been shipped completely
assembled except for the blade. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. If any parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts be>fore attempting to operate saw. A
blade, blade wrench, and this owner's manual are also
included.
WARNING:
If any parts are missing, do not
oprerate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
ACCESSORIES
The following recommended accessories are currentlj^bvailable at Sears Retail Stores.
■ 5-1/2 in. Thin Kerf Blade
^ WARNING:
The use of attachments or accessories not listed might be hazardous.
6