Meets cpsc blade safety requirements, Operation, Attaching grass catcher – Craftsman 247.370253 User Manual
Page 9: Know your lawn mower
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. ATTACHING GRASS CATCHER
•
Lift the rear discharge door on the mower and
remove the mulching baffle. See figure 6.
•
Place the hooks of the grass catcher into the
slots in the handle bracket assembly on each
side of the lower handle. See figure 7. Release
the rear discharge door.
To remove the grass catcher, lift the rear discharge
door on the mower. Lift the grass catcher up, out of
the slots in the handle bracket assemblies. Release
the rear discharge door.
A WARNING: Do not operate this mower
with the chute door open, unless the
complete grass catcher is properly
mounted on the mower.
OPERATION
1. KNOW YOUR LAWN MOWER
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER.
Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and
adjustments. Save this manual for future reference.
MEETS CPSC BLADE SAFETY REQUIREMENTS
Sears rotary walk-behind power lawn mowers conform to the safety standards of the American National
Standards Institute and the U.S. Consumer Product Safety Commission. The blade turns when the motor is
running.