Craftsman 315.275000 - Manual (Page 5)

PRODUCT SPECIFICATIONS
Depth of cut
Collet
Also included with packaging
Horsepower
0 - 1 - 1/2 in.
1/2 in.
1/4 in.
2
Rating
Amperes
No load speed
Net weight
120 volts, 60 Hz, AC only
9
25,000 RPM
7.8 lbs.
UNPACKING
Your router has been shipped completely assembled.
Inspect it carefully to make sure no breakage or
damage has occurred during shipping. If any parts are
damaged or missing, contact your nearest Sears
Retail Store to obtain replacement parts before
attempting to operate router. A 1/4 in. collet assembly,
7/8 in. wrench, and Owner's Manual are included in
the box.
WARNING: If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
ACCESSORIES
THE FOLLOWING RECOMMENDED ACCESSORIES ARE
CURRENTLY AVAILABLE AT SEARS RETAIL STORES.
Template Guide Bushing
COMBI­
NATION
PANEL
CUHER
VEINING
BIT
I
CORE BOX
BIT
V-GROOVE
CHAMFER
STRAIGHT COMB- HINGE DOVETAILRABBET OGEE, COVE BEAD
FACE INATION MORTISING CUHER BIT ROMAN 0 BIT, QUARTER-
BIT STRAIGHT, BIT BITS 45° ROUND
BEVEL CHAMFER BITS
CUHER
BIT
1
CD
Í
CD
LJ
i)
111
A
1 *CARBIDE TIPPED BITS |
ARBOR
2589
WITH 2
BALL
BEARINGS
(1/2 IN. &
5/8 IN.)
*25895
*25895 FOR CARBIDE TIPPED EDGE FORMING BITS
2589 FOR HIGH SPEED STEEL EDGE FORMING BITS
A WARNING: The use of attachments or accessories not listed above might be hazardous.