Craftsman 152.213351 - Manual (Page 13)

Place the 4-inch hose clamp (F) on the other end of
4-inch flexible hose (G). Slide 4-inch flexible hose
over the intake funnel (H) and tighten 4-inch hose
clamp securely. See figure 15.
COLLECTION BAG TO
DUST COLLECTOR ASSEMBLY
Loosely thread end of collection bag strap (A)
through clamp (B). Place open end of collection
bag (C) over exhaust port (D) and firmly pull strap
to fasten collection bag to exhaust port. See figure
16 and 17.
Fig. 17
A
warning
MAKE CERTAIN THE DUST COLLECTOR IS
DISCONNECTED FROM THE POWER SOURCE.
Fig. 16
13