Controls detail, Continued – Nikon fe2 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTROLS
DETAIL
—continued
"■ S',
ASA/ISO Film Speed Dial ®
The scale on the ASA/ISO dial has settings for speeds from
ASA/ISO 12 to 4000. Two lines between each number stand for
intermediate settings, such as 64, 80, etc. The diagram above
gives the speeds for all intermediate settings. To set the film
speed in use, lift up the dial and rotate it until your desired
number (or line representing the film speed) click stops opposite
the red index dot.
The ASA/ISO is a numerical rating of the film’s sensitivity to a
given amount of light. The higher the number, the greater the
sensitivity, and vice versa. The film’s ASA/ISO is indicated on the
cartridge itself as well as on the film carton and the data sheet
packed inside.
34