Depth of field, Using filters, Using lens hood hk-21 – Nikon 4DIF User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DEPTH OF FIELD

Depth of field can be checked with the white indicator engraved on the lens barrel.

If your camera has a depth-of-field preview function, it is possible to check the depth of field in
the viewfinder. (For details, see camera instruction manual.)
Depth of field can also be checked by referring to the table on page 39.

USING FILTERS

Always use a filter with the lens. The slip-in glass filter holder comes mounted with a Nikon

NC filter. A slip-in gelatine filter holder is also supplied with the lens.

Replacing glass filters -

-must. B, C, D

1. Press down on the glass filter holder knob, and turn counterclockwise until the white line on

the knob is at a right angle to the axis of the lens.

2. Pull the holder out.
3. Unscrew the mounted filter and replace with the filter you want to use.
4. Put the holder back, push down on the knob, and turn clockwise to lock.

-must. E

Using gelatine filter -----------------------------------------------------------------------

1. Cut the gelatine filter into a circle of approx. 40mm (1.6 in.) in diameter.

2. Open the gelatine filter holder plate by pushing on the latch and lifting up.

3. Insert the gelatine filter into the holder and close the plate. Make sure the filter is

unscratched and free of dust and take care that it stays flat.

4. Remove the glass filter holder from the lens and insert the gelatine filter holder.

USING LENS HOOD HK-21

When shooting in bright sunlight, use the lens hood to prevent stray light from entering lens.

To Use Lens Hood HK-21

-------------------------------------------------------------------------------Illust. F

1. Loosen lock screw on the HK-21.

2. Slip HK-21 onto the front of the lens.

3. Tighten the locking screw.

To Store the Lens Hood

Loosen lock screw on the HK-21. Reverse the HK-21, then slide back onto the lens and tighten

the HK-21 lock screw.

Standard Accessories

Slip-on leatherette front lens cap

Strap

Rear lens cap LF-1

Lens hood HK-21

39mm screw-in filter NC

Heavy duty case CT-501

Holder for gelatine filters

Optional Accessories

Other 39mm screw-in filters

Teleconverter TC- 14E

Teleconverter TC- 14B

Teleconverter TC-20E

Teleconverter TC-301

14

Advertising
This manual is related to the following products: