When using vari-program, With sb-24 – Nikon Camera N90 User Manual
Page 176
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
With SB-24
Lens
Metering system
Exposure m ode
Program m ed and
Shutter-Priority Auto
Aperture-Prio rity
Auto and Manual
D-type AF Nikkor lens, non-D-type
AF Nikkor lens (except for AF Nikkor
for F3AF) and Al-P-Nikkor lens
Matrix, Center-Weighted
and Spot
Multi-Sensor Balanced Fill-Flash
Other lenses
(or with accessories)
Matrix
Center-Weighted Fill-
I
Center-Weighted Fill-
Flash'f Flash'2
Center-Weighted
Center-Weighted Fill-
Flash‘3
Center-Weighted Fill-
Flash
Spot
Spot Fill-Flash*3
Spot Fill-Flash
Metering system and exposure mode automatically switch to Center-Weighted and Aperture-Priority,
respectively.
‘2 Metering system automatically switches to Center-Weighted.
*3 Exposure mode automatically switches to Aperture-Priority.
• In all the cases listed above, DD and 1^ for Automatic Balanced Fill-Flash appear In
the SB-24's LCD panel.
• By pressing the SB-24's M button, you can cancel Automatic Balanced Fill-Flash
control to perform standard TTL flash operation. For standard TTL flash, the SB-24’s
LCD panel shows 1111 and blinking 1^. For details, see the SB-24 manual.
112
When using Vari-Program
• Vari-Program can be used only
with AF Nikkor including D-type
AF Nikkor lenses and Al-P-Nikkor
lenses. With other lenses, shutter
is locked.
• TTL auto flash mode and Matrix
Metering are automatically
selected to perform Multi-Sensor
Balanced Fill-Flash.