Flash photography – Nikon Camera F3AF User Manual

Page 75

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FLASH PHOTOGRAPHY

The Nikon F3AF has been specially designed to make electronic

flash photography easier than ever. When used with an acces­

sory Nikon dedicated flash unif, the camera offers fully auto­
matic through-the-lens (TTL) control of the flash exposure. This

means that while the shutter is open, the camera's silicon

photodiode (SPD) reads the light reflected directly off the film

and tells the flash unit to cut itself off when the exposure

is correct.

To prevent mistakes, the camera also offers automatic switch­
over of the shutter speed for proper synchronization. With the

shutter speed dial @ set at A or 1/125 sec. or above, the shutter
speed is automatically switched to 1/80 sec. as soon as the
flash is turned on. As a reminder, the LCD shows 80 on auto or

M 80 on manual. For creative fill-in flash effects, you can set the

speed manually to 1 /60 sec. or below and the shutter fires at the

speed set with the speed in use displayed in the viewfinder.

For non-dedicated flash units, an X setting is provided, giving

you the proper manual speed of 1/80 sec. At X, M* 80 appears

in the LCD. Flowever, if you use a Nikon dedicated flash unit at

this setting, M 80 appears as soon as the unit is turned on.
When shooting manually with any flash unit, it is necessary to

determine the flash unit's guide number for the film you are

using; then set the aperture to match the shooting distance.

48

Advertising