Canon AUTO ZOOM 1218 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Manual Control of Aperture : Manual operation is possible by
releasing the EE mechanism. Aperture is electrically coupled
with the aperture control ring. Fade-ins from f/22 and fade-outs
to f/22 are possible with aperture control ring and an ND filter.
Power System:
Film drive and power zooming operated by two
micro-motors.
Power
zoom
can
be
regulated
in
two
speeds.
Entire zooming is done in 3-S and 10-12 seconds at " H ” and
“ L" respectively.
Power Source : Five l.Svpenlight (size AA) batteries. Sufficient
power for 15 cartridges of film under normal temperature.
Battery Tester: Built in. Indicates power levels of mercury and
penlight batteries.
Manual Zooming:
Performed by manual zoom lever. Revolving
angle of 150°.
Footage Counter: Counts up to 50 feet. Automatically resets
when the cartridge is taken out.
Film Transport Indicator:
For checking film advancement.
Release Sockets: For remote control, cable release and single
frame.
Trigger Grip:
Detachable. With wrist strap.
Body Coior : Black.
Accessories:
Lens Hood, Remote Control Switch 3, Series IX
Filters, 85mm Lens Cap, Viewfinder Cover 4, Release 5, Carrying
Case.
Size: Body, 256 x 104 x89mm (10" x 4" x 3/^"). Trigger grip,
128 x115 x32mm (5" x 4/^" x 1X‘).
Weight:
Body, 2,000 grams (4 lb. 6 oz.). Trigger grip, 280 grams
(lOoz.).
Subject to alterations.