Casio PX-750 User Manual
Page 34
E-32
Assembling the Stand
11.
Use the screws
J
to securely fix the brackets
at the top of side panels
A
and
B
to the
bottom of the piano.
12.
After checking to make sure the six screws
that secure side panels
A
and
B
are fully
tightened, cover the heads of the screws with
screw caps
D
.
1.
Making sure that the pedal unit cable plug is
oriented as shown in the illustration below,
plug it into the pedal connector on the bottom
of the digital piano.
•
Press the plug fully into the connector as far as it will
go.
•
Use the clips G to secure the pedal cable to two
locations on side panel B.
1.
Slide the music stand under the two bolts on
the top of the digital piano as shown in the
illustration and then tighten the bolts.
J
J
D
To connect the cable
To install the music stand
G