Canon AV 1 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Always wipe the battery poles and camera
contacts with a clean, dry cloth before inse
rtion to prevent any corrosion and damage to
the camera due to dirt or fingerprints.
To load the battery:
1.
Push the battery chamber cover opening
switch in the direction of the arrow. The
battery chamber cover will flip open.
2.
Following the'diagram on the inside of
the battery chamber, load the battery
negative pole first, pushing it downwards
in the chamber. Make sure the poles are
facing in the correct directions.
To unload the battery, simply tip the positive
end forwards and pull it out from the top.
Advertising