Canon L2 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Canon
L
i
has a complete built-in flash synchronizer both
for straight and electronic flash,
ISO
Set the Flash Synchronization Selector (19) to show for;
FP
(Focal
Plane)
Bulbs
for
all
speeds
from
l/IOOO—1
sec.
M Bulbs for speeds from 1/125—1 sec.
Set the Flash Synchronization Selector to show
for:
F or M -2 Bulbs for speeds from I/30--1 sec.
Electronic Flash (shutter speed 1/50 sec.)
1.
For
Electronic
Flash,
turn
High
Speed
Shutter
Dial,
as
shown,
to
“X”.
Slow
Speed
Shutter
Dial
should
be
set
at 1/30 sec.
. ------------- T -«
2. When using “F” type bulbs, be sure High Speed Shutter
is at 1/30 sec.
NOTE:
Canon
Lz
has
a
built-in
flash
synchronizer
for
using
FP
(Focal
Plane)
Bulbs
at
1/60
sec.
or
faster
shutter
speeds.
It
is
not
synchronized
for
electronic flash or speedlignt.
Canon Ly has no built-in flash synchronizer.
Electrical contact is perfectly made for flash bulbs
when the Canon Flash Unit Mode! V is attached to
the Flash Unit Connector Socket (13). No external
wiring is necessary and all synchronization is done
automatically in the camera itself.
To extend the Flash Unit away from the Camera
or to connect a Speedlight Unit, use Canon
Extension Cord Va (15 ft.) or Vb (3 ft.)
>
O
o
19