Condensation (dew), What is condensation, Condensation is likely to occur when – Canon E 500 User Manual

Page 89: Preventing condensation, When condensation is detected, To start using the camera again

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Condensation (DEW)

B

What is condensation?

Condensation (DEW) means tiny droplets of
water that occasionally form on the camera
surface when it is moved from a cold place to a
warm place. Using the camera when
condensation is present may damage both tape
and camera.

Condensation is likely to occur when:

A.

The camera is brought from a cold place to a

warm place.

B.

A cold room is heated rapidly.

C.

The camera is taken from an air-conditioned

room to a warm and humid place.

D.

The camera is placed in a humid environment.

Preventing condensation

Remove the cassette and place the camera in a
plastic bag prior to bringing it into a warm area
where condensation is likely to occur. Wait until

the camera reaches room temperature before

removing it from the bag.

When condensation is detected

When condensation is detected in the camera,
the OPERATE indicator flashes, “DEW” flashes in
the viewfinder and the tape automatically stops.

Immediately remove the cassette, leave the

cassette compartment open and turn the camera
off. Leave the camera in a dry place until the
condensation evaporates.
• Sometimes “DEW” may not appear in the

viewfinder until 10-15 minutes after
condensation has formed.

To start using the camera again

Even if “DEW” and the OPERATE indicator no
longer flash when the camera is turned on, wait at
least one more hour before attempting operation.

The time required for condensation to clear varies
with the surrounding conditions; it can be as long

as 1 hour.

>

D

g

H

o

z

>

o

n

o

83

Advertising