Shutter button operation and autofocus – Canon EOS 1N RS User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Shutter Button Operation and Autofocus
2. Pressing Completely
This releases the shutter and takes the
picture, then advances the film. The
LCD panel’s frame counter displays
the frame number.
• Viewfinder data is extinguished during
exposure.
'^JL/
If the camera moves at the instant the shutter is released, the motion during exposure
may cause an unsharp picture. This occurrence, called “camera shake,” can be pre
vented by following these guidelines:
(1) Hold the camera with your right hand and the lens with your left hand firmly so that
they do not move when you take the picture.
(2) Gently press the shutter button from the halfway position to the fully-pressed posi
tion with the fat part of your index finger. The trick to keeping the camera still when
taking a picture is to press the shutter button by gently squeezing the camera with
your right hand.
The shutter button stroke (height) can be changed according to your preference by tak
ing the camera to an authorized Canon service center (modification will be at the own
er's expense).
21